Out of stock!
EMI Payment Options
Product Description
Specification
|
Output |
|
|
Output power capacity |
800Watts / 1.0 Kva |
|
Max Configurable Power (Watts) |
800Watts / 1.0 kVA |
|
Nominal Output Voltage |
230V |
|
Efficiency at Full Load |
90.0 % |
|
Output Voltage Distortion |
Less than 2% |
|
Output Frequency (sync to mains) |
50/60Hz +/- 3 Hz |
|
Other Output Voltages |
220, 240 |
|
Load Crest Factor |
3 : 1 |
|
Topology |
Double Conversion Online |
|
Waveform type |
Sine wave |
|
Output Connections |
(4) India 3-pin 6A (Battery Backup) |
|
Bypass |
Built-in Bypass |
|
Input |
|
|
Nominal Input Voltage |
230V |
|
Input frequency |
40 - 70 Hz |
|
Input Connections |
India 3-pin 6A |
|
Cord Length |
1.52meters |
|
Input voltage range for main operations |
100 - 280 (half load)V |
|
Number of Power Cords |
1 |
|
Efficiency at Full Load |
90.0 % |
|
Batteries & Runtime |
|
|
Battery type |
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
|
Typical recharge time |
6hour(s) |
|
Communications & Management |
|
|
Interface Port(s) |
DB-9 RS-232 , Smart-Slot |
|
Control panel |
LED status display with On Line : On Battery : Replace Battery and Overload indicators |
|
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
|
Physical |
|
|
Maximum Height |
220mm , 22.0cm |
|
Maximum Width |
145mm , 14.5cm |
|
Maximum Depth |
400mm , 40.0cm |
|
Net Weight |
13.5kg |
|
Shipping weight |
14.5kg |
|
Shipping Height |
340mm , 34.0cm |
|
Shipping Width |
235mm , 23.5cm |
|
Shipping Depth |
478mm , 47.8cm |
|
Color |
Black |
|
Pallet Weight |
1686.54lbs. |
|
Units per Pallet |
50.0 |
|
Environmental |
|
|
Operating Environment |
0 - 40 °C |
|
Operating Relative Humidity |
0 - 95 % |
|
Operating Elevation |
0-900meters |
|
Storage Temperature |
-20 - 60 °C |
|
Storage Relative Humidity |
0 - 95 % |
|
Storage Elevation |
0-4500meters |
|
Warranty |
2 Years |
|
Note |
***Features, Price and Specifications are subject to change without notice. |
Features
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Excellent footprint
Small UPS footprint provides maximum usage of valuable electrical room floorspace
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Generator compatibility
Allows you to recharge your battery while on generator power.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Intelligent Battery Charging
Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Serial connectivity
Provides management of the UPS via a serial port.
Sine wave output
Eliminates humming and heat generated when powering tubelights and fans.
SmartSlot
Customize UPS capabilities with management cards.
Wide input voltage range
Designed for harsh electrical environments to save battery life.