HYPERX DESKTOP RAM FURY SERIES - 4GB (4GBx1) DDR3 1866MHz (HX318C10F-4)

Out Of Stock HYPERX DESKTOP RAM FURY SERIES - 4GB (4GBx1) DDR3 1866MHz (HX318C10F-4)

HX318C10F-4
4GB 512M x 64-Bit DDR3-1866
CL10 240-Pin DIMM

DESCRIPTION


HyperX HX318C10F/4 is a 512M x 64-bit (4GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components.
This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V.
Additional timing parameters are shown in the PnP Timing Parameters section below.
The JEDEC standard electrical and mechanical specifications are as follows: 

PnP JEDEC TIMING PARAMETERS:

• DDR3-1866 CL10-11-10 @1.5V
• DDR3-1600 CL9-10-9 @1.5V
• DDR3-1333 CL8-9-8 @1.5V

SPECIFICATIONS

CL(IDD)                                                                          10 cycles
Row Cycle Time (tRCmin)                                          44.75ns (min.)
Refresh to Active/Refresh                                           260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin)                                       32.125ns (min.)
Maximum Operating Power                                       TBD W*
UL Rating                                                                      94 V - 0
Operating Temperature                                              0o C to 85o C
Storage Temperature                                                  55o C to +100o C
*Power will vary depending on the SDRAM used.

FEATURES

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V) • 933MHz fCK for 1866Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only),
4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• Height 1.291” (32.80mm) w/heatsink, single sided component

Memory-(Ram)
MODEL 4GB DDR3-1600
DETAILED SPEC.

CL(IDD)                                                                          10 cycles
Row Cycle Time (tRCmin)                                          44.75ns (min.)
Refresh to Active/Refresh                                           260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin)                                       32.125ns (min.)
Maximum Operating Power                                       TBD W*
UL Rating                                                                      94 V - 0
Operating Temperature                                              0o C to 85o C
Storage Temperature                                                  55o C to +100o C

WARRANTY 3 YEARS
NOTE*** Features,Price and specifications are subject to change without notice.***

Write a review

Please login or register to review

Ask a question

Note: HTML is not translated!
  • Brand: HyperX
  • Product Code: HX318C10F-4
  • Availability: Out Of Stock
  • Rs.3,846
Check out this bundle:
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.